Understanding the Folding Block

The folding block is a crucial component of your scooter's folding mechanism. It allows for easy storage and transportation by enabling the scooter to fold down compactly. If the folding block is damaged or worn out, it can cause problems with the scooter's ability to fold or unfold properly. In some cases, buttons may get stuck, further complicating the folding process.

Before diving into the replacement process, it's essential to gather the right tools. You will need:

• Two Allen keys (usually included with the scooter)
• A small pick or screwdriver for removing clips
• A replacement folding block

Step-by-Step Guide to Changing the Folding Block

Follow these steps to change the folding block on your Micro Cruiser scooter:

1. Prepare the Scooter

Start by ensuring that your scooter is on a stable surface. It’s best to work in a well-lit area where you can easily access all parts of the scooter.

2. Remove the Locking Clamp

To begin, loosen the locking clamp located on the side of the scooter. This involves pushing on the pivot point while unscrewing the nut on the opposite side. Ensure that you unscrew it as far as it will go to release the tension on the clamp.

3. Remove the C-Clip

Next, you will need to remove the C-clip that holds the pin in place. Use a small pick to carefully pry the clip out of its groove. Once it’s removed, set it aside in a safe place.

4. Unscrew the Knob Nut

After removing the C-clip, unscrew the knob nut by turning it counter-clockwise. Once it is loose, you can pull the pin out from one side of the scooter.

5. Remove the Axle Bolt

Using the Allen keys, remove the axle bolt that connects the handlebar stem to the scooter deck. There will be one bolt on each side. If the bolts are stiff, apply some pressure to loosen them. Once both bolts are removed, set them aside.

6. Remove the Kickstand Bolts

Next, you will need to remove the kickstand bolts. Similar to the axle bolt, these bolts are located on each side of the kickstand. Use the Allen key to unscrew them and remove the kickstand.

7. Remove the Folding Block

With the kickstand removed, you can now take out the folding block. Be cautious of any spacers that may slide out during this process. If they do, simply place them back underneath the folding block once you have removed it.

8. Install the New Folding Block

Now that the old folding block is out, it's time to install the new one. Position the new folding block where the old one was located, ensuring that it aligns properly with the kickstand.

9. Reattach the Kickstand

Using the shorter bolts, reattach the kickstand to the left side of the scooter. Ensure that they are securely fastened but do not overtighten them yet.

10. Reinstall the Handlebar Stem

Insert the handlebar stem back into the scooter deck. Align it with the hole for the axle bolt and push it down until it fits snugly. Insert the axle bolt from the opposite side and tighten it securely.

11. Reassemble the Locking Clamp

Now, you will need to reassemble the locking clamp. Begin by placing the plunger and spring into the hollow bolt. The spring goes over the plunger, which should be positioned upright.

12. Secure the Locking Clamp

Insert the threaded portion of the locking clamp through the plate and into the bolt. Tighten the knob nut back onto the threaded part, ensuring it is secure without being overly tight.

13. Reattach the C-Clip

Finally, reattach the C-clip to secure the locking clamp in place. Use a screwdriver to gently push down on the end of the clip until you hear a click, indicating that it is properly seated.

14. Test the Folding Mechanism

With everything reassembled, it’s time to test the folding mechanism. Stand the scooter upright and press the button to fold it. It should fold smoothly without any resistance.

Conclusion

Changing the folding block on your Micro Cruiser scooter is a straightforward process that can significantly improve the functionality of your scooter. By following these steps, you can ensure that your scooter folds and unfolds with ease, allowing you to enjoy your rides without any interruptions. Regular maintenance , including checking the folding mechanism, will help extend the life of your scooter and enhance your riding experience.

If you encounter any difficulties during the process, don’t hesitate to refer to the scooter’s manual or seek assistance from a professional. Happy scooting!