Introduction
Replacing the brake on your Mini Micro or Maxi Micro scooter is an essential maintenance task that ensures safety and optimal performance. This guide will walk you through the step-by-step process to successfully replace the brake assembly. The procedure for both models is quite similar, but there are some distinctions to be aware of, particularly regarding the length of screws used in the Maxi scooter.
Tools Required
Before starting the replacement, gather the following tools:
- Phillips screwdriver
- Flathead screwdriver
- Wrench (if necessary)
- Container for nuts and bolts
- Camera (optional, for reference)
Step-by-Step Process
Follow these steps to replace the brake on your scooter:
1. Remove the Handlebars and T-bar
Start by detaching the handlebars and T-bar sections to access the deck of the scooter. This will provide you with the necessary space to work on the brake assembly.
2. Detach the Deck
The deck is secured by eight screws. For the Mini Micro, all screws are of equal length, while the Maxi Micro has four longer screws in the center. Keep the screws organized to avoid confusion during reassembly.
Once the screws are removed, gently lift the deck. If it feels stuck, apply a little pressure on both sides to ease it off. This will expose the chassis and the brake assembly.
3. Access the Brake Assembly
With the deck removed, you can now see the brake assembly. The configuration may vary slightly between the Mini and Maxi models, but the principle remains the same. Look for the screws that secure the brake assembly in place.
4. Unscrew the Brake Assembly
To remove the brake, use either a Phillips or flathead screwdriver. If the screws are rusted, a flathead screwdriver may provide better grip. Keep your finger underneath the assembly to catch any falling nuts or bolts.
As you unscrew, push down gently to remove the nuts from the bolts. It’s best to do this one at a time to avoid losing parts.
5. Install the New Brake
Once the old brake is removed, position the new brake assembly in place. Insert the bolts and secure them with the nuts. Make sure the nuts are sitting properly within the encapsulated slots of the deck.
When tightening the bolts, do not overtighten. Ensure that the assembly is secure but can still be adjusted if necessary.
6. Reattach the Deck
With the new brake securely in place, it’s time to reattach the deck. Align the deck over the brake assembly and ensure it is pushed down completely. You should be able to see the color of the deck through the chassis, indicating that it is properly seated.
Insert the screws, using the longer ones for the center and the shorter ones for the back. Tighten them accordingly.
Tips for a Successful Replacement
- Keep all screws and nuts organized. Use a container to avoid losing parts during the process.
- Consider taking pictures before disassembly. This will help you remember how everything fits together.
- If you encounter resistance while removing the deck, ensure that all screws are fully unscrewed before trying again.
- Regularly check your brakes for wear and tear to maintain safety while riding.
Conclusion
Replacing the brake on your Mini Micro or Maxi Micro scooter is a straightforward process that can be completed with basic tools. By following these steps, you can ensure that your scooter remains in good working condition, providing safe and enjoyable rides. Regular maintenance, including brake replacement, is key to prolonging the life of your scooter.
Accessorise your Scooter
Fuel the imagination. Co-ordinate and Personalise.