Ramp Tricks Clamp: Black

Align the Scooter

1. Straighten the front wheel

   • Stand in front of the scooter and make sure the front wheel is pointing directly forward.

   • Adjust the wheel so it’s parallel with the deck of the scooter for accurate alignment.

2. Square the handlebar

   • Look at the handlebar from above and ensure it is perfectly perpendicular to the deck.

   • Check that both sides of the handlebar are level and even.

Position the Clamp

1. Locate the slot inside the shaft

   • Open the clamp and find the small slot inside the vertical shaft.

   • Slide the slot into position so that it sits exactly in the center where the clamp halves meet.

   • This ensures the clamp grips evenly and the handlebar doesn’t tilt.

Tighten the Bolts

1. Start with a light touch

   • Slightly tighten the top bolt first, then the bottom bolt just enough to hold the clamp in place.

2. Alternate and align

   • Continue alternating between the top and bottom bolts gradually.

   • This keeps the clamp square and prevents misalignment or uneven pressure.

3. Increase tension gradually

   • Slowly tighten both bolts until the clamp is secure.

   • Avoid over-tightening, but ensure there is no movement in the handlebar or shaft.

Final Check

1. Inspect the clamp

   • Make sure the gap between the clamp halves is even all around.

2. Confirm alignment

   • Double-check that the handlebar and front wheel are perfectly aligned.

3. Test stability

   • Try gently moving the handlebar; it should feel firm with no wobble.